Posts Tagged ‘environment’

Ok, really its the same subject as the last article, but I want to share the content!

Many of the design strategies implemented at the Earth Rangers Centre are relevant to your home – energy efficiency, high levels of thermal comfort, water efficiency and careful attention to indoor air quality levels.  No, not many homes will be able to implement all of these technologies at the same time, but this article shows what will result if you are able to implement everything on your green building wish list.

On a side note, this is my first experience writing a “peer reviewed” article, and the team at ASHRAE’s High Performing Buildings was patient and professional. Have a look a the article, I think the results speak for themselves.

ASHRAE Article

ASHRAE Article

It’s been a while since I wrote anything for my blog, and it’s because I have been writing almost non-stop during work hours. Have a look at the site, and feel free to comment here or on the ERC site.

Whether you are interested in energy metering, efficiency or generation, water conservation or reuse, carbon offsets, EV charging and more, this commercial building really has pulled out all the stops to demonstrate the next generation of green building technologies and how they interact.

Earth Rangers Centre Showcase

Earth Rangers Centre Showcase

The Environmental Commissioner of Ontario (ECO), Gord Miller, recently released a report summarizing the progress of Ontario’s energy conservation measures. In short, there is good news and there is bad news.

Everyone loves the good news first so here it is: conservation results in 2011 were “generally encouraging” meaning that consumed energy and peak demand decreased, with some pretty big caveats. Energy saved in this reporting period was the result of investment in the previous period, results were mixed at best in the residential sector, and so on. I encourage you to read the full report here.  605,000,000 kWh were saved at the cost of $0.03/kWh. Peak demand was reduced by 16% of the 4 year target. We seem to be on track for consumption, with work to do on demand reduction.

Now the bad news. We are focussed almost entirely on how the power we consume is generated and where its coming from. “Wind turbines are ugly” or “they’re not putting a power plant in MY neighborhood” comments drive me crazy. The Green Energy and Economy Act, political hot-potatoe that it is, has not been implemented with nearly enough focus on “the culture of conservation” as promised in its’ initial rollout.  More power plants wouldn’t be needed if we didn’t need more energy.

So what to do about this? Obviously, if you have read any of my other posts, my opinion is to invest more heavily in conservation, agreeing with the ECO. Simple conclusion, but how? Engage people. Make it easier, heaven forbid maybe even fun, to save energy. Collaborative apps and websites are coming along.  Apps like Powercents give plenty of tips on how to reduce home energy use, and how to manage time of day price differences to home owners financial benefit.  Gridwatch, another app from Energy Mobile, shows users the power sources required to supply consumed energy and the resulting CO2 emissions. I’m looking forward to an upcoming update that will show emissions per kWh in real time based on the province’s energy mix at that time.

Shifting clothes dryer use to off-peak

Shifting clothes dryer use to off-peak

I agree with the ECO that the price difference between on- and off-peak just isn’t big enough to encourage real changes in behaviour, and my house is the perfect example. My wife is home on mat leave with my 6 month old son, and does the majority of home tasks when she can, irrespective of what time of day it is. If I tell her that we can save $0.27 cents per load by doing it at night instead of during the day, she’d throw a quarter at me and tell me to be grateful its being done, and I don’t blame her. Make that a dollar per load, and she’d likely think twice, quickly equating that to $6 per week, almost $30 per month.

Screen Shot 2013-01-26 at 2.07.42 PM

Weekly, monthly consumption trends summarized in Quinzee

We have the tools in place to evaluate, learn and change our behaviours with resulting dollar savings and reduced environmental impact. I spoke with Faizal Karmali, one of Quinzee’s founders some months ago, and he envisioned neighbors competing against each other to reduce energy use. I would love to beat the pants off my neighbour at something that saves me money AND reduces all the environmental impacts that result from power generation.

Screen Shot 2013-01-26 at 2.06.42 PM

See what time the oven was turned on?


I will admit that I am a gadget geek. Electronics companies love me, as I am always interested in trying the latest and greatest. That love of bigger, better, stronger, faster, has translated into my professional life as well, albeit now tinged with green – high performance buildings. Now it’s smaller, better, faster and more efficient that I am gunning for.

As you can see from my other posts, that extends into my personal life as well. For some time now, I’ve been looking for a way to reduce, if not eliminate, my gasoline purchases, and to green my commute. My gadget obsession extended to my previous car, and I tinkered with it as a bit of a project. A rally car converted from an econo-box, the Subaru Impreza WRX has served me faithfully since I purchased it new in October of 2005. The good: its a tank in snow thanks to snow tires and full-time all-wheel-drive, it has more than enough power to make your hair stand on end, and it’s sharp looking (the functional hood scoop ramming air into an intercooler to cool turbocharged air is a pretty distinct feature). The bad: 10 to 11 liters per 100 km, or 21-23 MPG for my American friends, means a pitiful 400km (250 miles) per tank of 91 octane fuel in mixed highway and city driving. I don’t baby the car, nor do I drive like a maniac, not with that quickly moving gas gauge staring me in the face. I new what I was getting into when I purchased it, and it has delivered on those expectations.

So, as per my previous post, I’ve been looking for an electric vehicle (EV), and have been smitten by the Leaf (even though that name is pretentious beyond belief). My goal is to sell the Subaru to a fellow enthusiast (still in progress), and use that to pay for the majority of the Leaf. The remaining finance payments will be covered by my not having to purchase any gas, or change any oil. Being able to charge at work definitely plays a major role in this decision. Insurance, unbelievably, is exactly the same as the Subaru.

EV-Chargers and Leaf

I have been looking at all the pros and cons for a year now. I’ve looked at the various Plug-in hybrids (Prius, Focus) and the Volt, I’ve driven the i-MiEV, and nothing seemed to really accomplish what I wanted like the Leaf, nor provide the bang for the buck in terms of gadgetry and performance.

The end result? There is now a 2012 Leaf SL in my garage (with quick charger and cool little PV cell on the spoiler to trickle charge the 12V battery). Now we will see how this thing performs when I have to use it on a daily basis instead of just borrowing someone else’s. I just put 45 liters of gas into the Subaru, and I am hoping that is the last tank of gasoline that I will ever purchase for my personal vehicle.


Is that a proboscis?

I am sure that I have some surprises in store. Will I run out of charge? How much will my home energy consumption increase as a result of charging at home? How does it handle in a Canadian winter? How the hell do you use the navigation system?

After just a couple of hours, I have managed to connect my garage door openers to the homelink system, enter my house as my home charging station on the GPS system (just in case I forget how to get home – do people actually use these features?) and top up the charge with the supplied trickle charger. The carwings app now has a home on my iPhone – just because I really needed a new app – and I’m remotely connected to be able to pre-condition the car while plugged in, check the charge status or start/stop charging.

Carwings App

Carwings App

I will admit that I am stumped as to how I am going to get 220V power to the garage without tearing out drywall to access the top of the breaker panel. It looks like I will be taking advantage of Ontario’s EV Charging installation rebate that starts January 1. I have a feeling this will be a bit of an adventure as I currently renting my home (and content for a future post!).

We still have our family minivan for longer drives like camping trips and visits to the grandparents. My wife can now use the Leaf around town for her errands, whereas she could not drive the manual gearbox WRX (I tried to teach her and I think the smell of burning clutch was just too much to bear). I think that the sky-blue leaf now occupying my garage will make an excellent addition to the fleet.

Let’s say you are going to renovate your house, home or apartment.  Maybe take out some walls, refinish some rooms, or maybe you’re planning something bigger, and you are building addition or even a new home.  Have you thought about where that wood, concrete, granite or other building material came from?

More and more, consumers, builders, architects and engineers are asking these questions.  As a result of my day job, I have had the opportunity to see some of the inner workings and more progressive companies in the aggregate industry. I wrote a piece on this experience and some of the operational benefits that a thermal mass building can realize as a result of making this material choice here.

However, I’ve never really had the opportunity to experience the wood industry’s best practices.  Sure, I knew that the Forestry Stewardship Council (FSC) and its certification of forests and products existed, and that it was a good thing to support because of my understanding of the LEED green building rating system.  I had even made sure that the three 2×4’s that I purchased at Home Depot to hang my bikes in the garage were FSC certified.  To be honest, that certification didn’t really have any tangible meaning for me, because I am a mechanical engineer, and it was simply outside my usual field of expertise.  I can’t keep a cactus alive in my house, let alone appreciate how to sustainably harvest lumber on a large scale (besides being naturally offended by images of clear-cut forests).

That has changed for me. I had the good fortune of attending the US Green Building Council’s annual Greenbuild Expo, held in San Francisco this year. I signed up for one of the full-day tours, in order to see an FSC Certified redwood forest first hand.

Nice view of the coastal highway from the lumber office

The trip started with a clean diesel powered bus ride  along the coast south of San Francisco to Big Creek Lumber in Santa Clara County.  There were not nearly enough guardrails along the coast road for my liking. Each one of the buses had a tour guide from SCS Global Services, including the certifier of Big Creek’s forest, Robert Hrubes. The view from the forestry office was incredible, even if mostly obscured by fog and rain when we arrived.

Our visit started with a history of the family business, including the forestry practices that led them to certify their property for sustainable forestry.  The President, Janet McCrary Webb, along with Bob Berlage (Director of Communications) discussed how the property had been almost clear-cut to rebuild the city of San Francisco after the fire of 1906. The McCrary’s took possession of a site that had some young, rapidly growing redwoods in 1946. In order to maintain an economic future for the property, they selectively harvested redwoods, leaving many rapidly growing redwoods to continue to mature.  They do not harvest trees at a certain age, but selectively, and typically on a 14 year cycle, depending on many factors. Amazingly, redwoods can grow up to 8 feet per year if they have access to enough light and water, so this selective harvesting can actually increase growth rates of those trees not harvested.

Fast growing 2nd and 3rd growth redwood

The result is an impressive forest, dotted here and there with stumps from previous harvests, with 2nd, 3rd and 4th growth interspersed, and up to 300’ tall. I have heard that biodiversity suffers in forest plantations, and that may be the case, but not in this forest. Slugs, salamanders, raptors, and other evident signs of a relatively healthy ecosystem were all around us.

Blurry image of a salamander running away from an iPhone

Bob mentioned that a botanist that was hired to study the forest noted a 45% increase in biodiversity after a section of the forest had been selectively harvested (I would assume that it was because there was access to more sunlight resulting in room for other species to get a foothold).

Do you see a raptor?

Another anecode shared was what about Bob referred to as “granary” trees, where woodpeckers would fill pecked holes in the redwoods with acorns, and then feed on the bugs that would then arrive to eat the acorns. These trees would be bypassed by Big Creek, and not selected for harvesting.

Many of the forestry practices in use by Big Creek are very specific to redwood, and understandably so, as it is their primary product (along with some firs), and what grows naturally in these fog shrouded coastal rain forests.  This forest, and business, exists in an extensively regulated environment (called the most regulated in the world by Bob), and so Big Creek is used to taking many months to perform the necessary environmental assessments, permits and community outreach required to harvest in the area. As an example, a raptor survey is performed before harvesting can start, to ensure that a raptor species is not present to be displaced.

This sensitivity and regulation leads to some pretty incredible practices, exemplified by helicopter yarding, where felled lumber would be moved to a central point to be removed by vehicle. This dramatically reduces the requirement for roads into more sensitive areas, but not without cost. A helicopter for this purpose costs about $5,000 per hour – $83 per minute – to perform this task. On steep grades where tractors would irreparably rut and damage soils, cable extraction reduces intrusion.  Extraction near water courses must respect setbacks, to reduce, if not eliminate, sedimentation of waterways that could affect salmon other fish species.

I think you get the point that selectively harvesting timber like this is a complex task, to say nothing of getting approvals to even start.

One of the largest benefits to Big Creek of the FSC certification is a third party verification of their harvesting practices, ensuring that they have a social license to operate.  I can see this same principle applying to the aggregate, mining, and other resource industries.  We are not going to stop using raw materials in our buildings, businesses and society any time soon, so we should be using those resources in a manner that makes those assets as productive as possible for as long as possible, with a little collateral damage as possible. It makes good business, environmental, and social sense to do so, as Big Creek is proving. I appreciate that this forest has been conscientiously managed for generations, and I am sure there are a depressing number of forests that are not managed this way.

In the interest of full disclosure, I am a mechanical engineer, not a biologist or forester, so I may not have seen the entire picture. The tour only went through a very small area, and I am sure it was not selected accidentally. I have no reason to believe that the owner had anything to hide, but nor am I naive enough to blindly accept what I see at face value all the time. That is the benefit of the third party certification. Someone else who knows what to look for has verified that the site meets sustainability criteria.

Back to my garage 2×4, I now understand that I can take the FSC chain of custody number, and see who has handled the wood, and where it came from.  This 2×4 holding my bikes against the wall looks like it came from near the northern Ontario and Quebec border. You can check any FSC number here.

My 2×4

I hope that this sneak peak into a forest that is better managed will lead you to look for that FSC logo the next time you need a piece of lumber, redwood or not, and that it makes you ask the question of where your building materials are coming from, and to see if there is a better choice you could make.